Vélo Québec's Brief – Alto High-Speed Rail Network

27 October 2026

Over the past decade, significant progress has been made in integrating bicycles into rail transit in Quebec. At Exo, which operates most of the commuter trains, restrictions on bringing bicycles on board have been significantly relaxed, and several stations now have secure, covered bike parking areas.

On the Réseau express métropolitain (REM), bicycles are prohibited only during rush hour, following a policy similar to that of the Société de transport de Montréal. However, a relaxation of this rule could be considered, for example, by allowing bicycles to travel in the opposite direction of commuter traffic, even during peak hours.

Despite this progress, significant efforts are still needed to ensure optimal efficiency in intermodal travel between public transit, cycling, and walking—particularly when comparing Quebec’s experience to that of several European countries where the integration of active modes of transportation into rail networks is more advanced.

In countries with the most advanced public transit systems, rail and light rail systems are designed to accommodate cyclists and their bicycles, or offer modern and secure parking solutions. The bike paths leading to these stations are continuous, safe, and well-integrated with the stations. 

The Alto project represents a unique opportunity to rethink this synergy in the Quebec context. Proposing a model for serving train stations that prioritizes the most efficient and sustainable modes of travel would maximize accessibility for all users. This also offers a significant economic advantage: active transportation to train stations results in infrastructure and operating costs that are significantly lower than those associated with bus or car access. 

Our analysis for the Alto project focuses on five main areas of intermodality with active transportation modes:

  1. routes to and within train stations;
  2. services at train stations;
  3. bicycle access on trains;
  4. use of right-of-way for bicycle lanes;
  5. crossings over the railroad right-of-way
  1. Directions to and within train stations

For the Alto project, it is important to consider how customers will reach the stations and whether the use of park-and-ride facilities is appropriate. Although it is difficult to completely rule out car access, the design of the stations presents an opportunity to prioritize alternative modes of transportation. Good connections to local bus services, as well as simple and user-friendly pedestrian and bicycle access, are desirable at all times of day and in all seasons. 

In addition to the route to the station, it is essential to consider the route inside the station. The ability to move easily within the station is crucial: inadequate stairs, a lift that is too narrow, or a platform that is lower than the train door can quickly become obstacles. Clear signage is necessary, both for navigating the station and for locating the train car or door providing access to the bike-friendly areas.

When train stations are located in areas that are not conducive to active transportation, it is necessary to make them more accessible: prioritize the shortest route and avoid tunnels that are difficult to light and maintain. Bicycles are an important complement to public transit, as they provide an efficient way to cover the first and last kilometers between stations and final destinations, while also freeing travelers from the hassle of having to find or pay for access to a car upon arrival.

Developing intermodality means focusing on the door-to-door customer experience.

  1. Services at train stations

Stations on the Alto network must offer comprehensive services to facilitate active travel and promote intermodal transportation.

Bicycle parking facilities must be provided. These must be designed to be functional and secure. They must be covered, accessible, and suitable for various types of bicycles, including cargo bikes. Access must be easy from all key points in the station, and indirect surveillance is desirable. A sufficient number of spaces should be provided, without assigning a specific space to each user. This infrastructure is essential for encouraging access to the transit system via modes of transportation other than cars.

As an example of best practice, The new bike parking facility at Gare du Nord in Paris is secure and features two air pumps, repair tools, and self-service charging stations. It offers spaces suitable for standard bicycles, electric-assist bicycles, as well as cargo bikes with cargo boxes, recumbent bikes, and bicycles equipped with accessories such as child seats or baskets.

Given the cost of building a parking lot—which can range from 2,000 $ to 12,000 $ per space, in addition to annual maintenance costs—bike parking facilities represent a cost-effective alternative.

In addition to parking facilities, train stations should offer additional services designed to enhance the passenger experience. These include, in particular:

  • bike-sharing systems (such as BIXI),
  • repair stations,
  • charging stations for electric bikes,
  • instructions,
  • water stations and restrooms.

All of these services must remain easily accessible to all users.

  1. Bicycle Access on Trains

It is important to allow bicycles on board trains in the Alto network without requiring them to be disassembled or packed. Train cars should be able to accommodate between 4 and 8 bicycles per car, a threshold recommended by the 2019 French Mobility Act, which is used here as a benchmark for best practices. For destinations with high tourism potential, this number will need to be increased to meet demand.

This provision facilitates intermodal travel and encourages bicycle use for the first and last kilometer. The rules for bringing bicycles on board should be easily accessible online, and any additional fees should be payable either online or on-site. This is one of the simplest measures to implement to improve the experience for cyclists.

  1. Use of Railway Right-of-Way for Bicycle Lanes

On sections of the Alto route where excess right-of-way is available, Vélo Québec recommends creating multi-use trails for walking and biking. These pedestrian and bike paths will facilitate access to stations and will integrate with the access routes already planned.

The construction of a railway also presents a unique opportunity to incorporate bicycle paths from the outset, allowing cyclists to cross man-made and natural barriers that hinder mobility and access to the area by bicycle. For example, it is possible to design for the cantilevered integration of a bike-pedestrian path on the deck of a railroad bridge to cross a river or a heavily trafficked road. Developing and building this type of infrastructure retroactively is always time-consuming, more expensive, and more complex, which is why it’s important to plan for it now. 

For the sections at ground level, developments similar to those seen in several cities in Canada and the United States could be considered, based on the «Rails with Trails» concept, which involves creating multi-use trails alongside active railroad tracks. 

The creation of a pedestrian and bicycle path can also be particularly relevant in communities without a train station. In these contexts, since there are no direct benefits associated with rail service, adding a trail can be a way to promote social acceptance of the project by providing a useful and accessible amenity for the local population.

  1. Crossings and Integration into the Existing Bicycle Network

As with the REM, it will be important to ensure that the Alto route interacts effectively with the existing bicycle network. We must ensure efficient connections and, conversely, avoid creating insurmountable barriers for cyclists and pedestrians.

About Vélo Québec 

Vélo Québec's mission is to develop a cycling culture for everyone, everywhere in Quebec. A national recreational organization recognized by the Quebec government, Vélo Québec promotes the use of bicycles for recreation, tourism and active transportation, in order to improve the health and well-being of the population, contribute to the economic vitality of our regions and meet our environmental challenges.

With its unique and original expertise, Vélo Québec is a benchmark in the planning, development and management of cycling infrastructures. Its know-how is put to good use in the municipal sector and among players involved in the transition to sustainable mobility.

In addition to its events, trips, publications and technical expertise, Vélo Québec coordinates education and mobilization programs, and oversees the deployment and standardization of Route verte.

Vélo Québec is also a key interlocutor with various levels of government to identify needs and solutions for improving and increasing bicycle use.

×